Elcometer 107 Grid Test Cutter
The Elcometer 107 Grid Cutter provides an instant assessment of the quality of the bond between the coating and the substrate.
This robust gauge is ideal for thin, thick and resistant coatings on any surface, flat or curved. An ideal test method for the worksite and the laboratory.
Sturdy
Large handle with good grip
Ideal for thick and hard coatings
Quick-change 4-sided cutter allows adhesion testing on a wide range of coating thicknesses (1mm, 1.5mm, 2mm and 3mm)
The Elcometer 107 Grid Cutter is available as a basic kit or a complete kit.
Spécifications
Technical specifications
Basic kit
Part number : F10713222-1
Knife type : 6 x 1mm
Dry film thickness: 0 - 60µm 0 - 2.4mils
Part number : F10713222-2
Knife type : 11 x 1mm
Dry film thickness : 0 - 50µm 0 - 2.0mils
Part number : F10713222-3
Knife type: 111 x 1.5mm
Dry film thickness: 0 - 90µm 0 - 3.5mils
Part number : F10713222-4
Knife type : 6 x 2mm
Dry film thickness: 50 - 125µm 2.0 - 5.0mils
Part number : F10713222-5
Knife type : 6 x 3mm
Dry film thickness : 121 - 250µm 5.0 - 10mils
Complete kit with ISO tape
Part number : F10713348-6
Knife type : 6 x 1mm
Dry film thickness: 0 - 60µm 0 - 2.4mils
Part number : F10713348-9
Knife type : 6 x 2mm
Dry film thickness : 61 - 120µm 2.4 - 4.7mils
Complete kit with ASTM tape
Part number : F10713348-1
Knife type : 6 x 1mm
Dry film thickness: 0 - 50µm 0 - 2.0mils
Part number : F10713348-2
Knife type : 11 x 1mm
Dry film thickness : 0 - 50µm 0 - 2.0mils
Part number : F10713348-4
Knife type : 50 - 125µm
Dry film thickness : 2.0 - 5.0mils
Packing list
Basic kit
Sturdy handle, cutter, hexagonal key, storage case and instruction manual (with grading table and adhesion test results)
Complete kit
Sturdy handle, cutter, hex key, instruction manual (with adhesion test results and grading table), magnifying glass (x6), brush and adhesive (ASTM or ISO), in ABS plastic carrying case
Standards
AS 3894.9, AS 1580.408.4, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6, ISO 2409, ISO 16276-2, JIS K 5600-5-6, NF T30-038
