Elcometer 270 Porosity Detector
Elcometer 270 uses the wet sponge technique. It has been designed to meet a new standard of use. It is a low voltage but high quality detector, with the same accessories as a spark porosimeter.
- Delivered ready to use
- Automatic sensitivity control and calibration
- Low battery indicator
- Visual and audible alarms
- Integrated or separate handle functionality
- Wide range of fully interchangeable accessories
- Quick-connect cables
- Large standard sponge
- Inspection kit available, for all your inspection needs
Vidéo
Spécifications
Elcometer 270/3 Porosity Detector
Part number
D270----3X
Voltage
9V et 90V
Maximum measurement range
500µm (20mils)
Sensitivity
9V: 90kΩ ±5%
90V: 400kΩ ±5%
Autonomie (utilisation en continu)
9V : jusqu'à 200 heures
90V : jusqu'à 80 heures
Elcometer 270/4 Porosity Detector
Part number
D270----4X
Voltage
9V, 67.5V et 90V
Plage maximale de mesure
500µm (20mils)
Sensitivity
9V: 90kΩ ±5%
67.5V: 125kΩ ±5%
90V: 400kΩ ±5%
Autonomy (continuous use)
9V : jusqu'à 200 heures
67,5V : jusqu'à 100 heures
90V : jusqu'à 80 heures
Battery type
3 AA alkaline batteries (LR1600) 1,5 V
(NiMH rechargeable batteries can also be used, but the range is reduced by 75%).
Accuracy of voltage settings
±5%
Dimensions
Sans accessoire
210 x 42 x 37 mm (8.3 x 1.7 x 1.5")
Standard accessories
175 mm (6.9")
Flat sponge
150 x 60 x 25 mm (6 x 2.4 x 1") environ
Weight
610 g (21 oz) including stand, cable and batteries
Packing list
Porosity sensor, standard stand and flat sponge, 4 m (13'2") return cable with alligator clip, 3 LR1600 (AA) batteries and instruction manual
Standards
AS 3894.2, ASTM D 5162-A, ASTM G6, ASTM G62-A, BS 7793-2, ISO 8289-A, ISO 14654, JIS K 6766, NACE RP 0188, NACE SP 0188, NACE TM0384
