Phased Array "Type A" calibration wedge

UT_SI_CN_CALPA-AXX | NDT +

The Phased Array "Type A" calibration block is used during the initial set-up and calibration of a multi-element ultrasonic unit.

This block can be used to perform tasks such as beam angle verification, wedge delay calibration, sensitivity calibration, DAC/TCG execution, etc.

The block has similar dimensions to a Type IIW block, but has been specifically designed for multi-element applications.

Spécifications

Rays

100 mm et 50 mm

Holes

(19) 1.0 mm diameter through holes

(1) 2.0 mm diameter through hole

(4) FBH 2.0 mm diameter x 2.0, 4.0, 6.0 and 8.0 mm deep

(4) FBH at 4.0 mm diameter x 1.0, 3.0, 5.0 and 7.0 mm depth

(3) FBH with 2.0 mm diameter x 3.0 mm depth machined within a 50 mm radius

(4) EDM notches 0.1, 0.2, 0.3 , and 0.4 mm deep x 0.5 mm wide x 25.0 mm long

Block dimensions

25 x 100 x 300 mm

Produits similaires

Scanner CND Sweeper

Jauge d'épaisseur Swift UT

Thickness gauge Scorpions 2

Ultrasonic flaw detector by MAUT DOLPHICAM 2