Elcometer 506 Testeur d'adhérence par traction
The Elcometer 506 is a lightweight, portable and easy-to-use adhesion gauge, available in analogue or digital versions. It measures the tensile adhesion of coatings and can be used on site or in the laboratory. It has a capacity of 50 Mpa (7250 psi).
The design of the Elcometer 506 allows a uniform force to be applied over the entire range; simply turn the handwheel gently to ensure reproducible results and an accuracy of ± 1%.
The Elcometer 506's quick-connect system allows 14.2mm, 20mm or 50mm diameter studs to be easily attached. Used in conjunction with the range's many accessories, it can be used to test the adhesion of coatings to flat or curved, thin or thick substrates, including wood, cement or other fibrous materials.
The Elcometer 506 is equipped with a small, lightweight, ergonomic measuring head (activator), ideal for one-handed operation and adhesion testing in confined areas.
Tests on vertical surfaces can also be carried out in complete safety. Thanks to the magnetic clamp, the activator is held firmly in place to avoid any risk of accident in the vicinity of the test area.
Avantages
- Powerful
- Versatile
- Précis
- Resistant
Vidéo
Spécifications
Precision
±1% of scale
Nominal pressure
26 MPa (3800 psi)
Plots
Plot 14.2mm (0.56”)
Working range: 4 to 50 MPa (600 to 7200 psi)
Scale resolution Analogue: 0.1 MPa (10 psi) Digital: 0.01 MPa (1 psi)
Instrument length: 290mm (11.5")
Activator height: (including bezel) 85mm (3.4")
Instrument weight: 1.8kg (4lb)
Kit weight: 4kg (8.8lb)
Plot 20mm (0.76”)
Working range: 2 to 25 MPa (300 to 3600 psi)
Scale resolution Analogue: 0.1 MPa (10 psi) Digital: 0.01 MPa (1 psi)
Instrument length: 290mm (11.5")
Activator height: (including bezel) 85mm (3.4")
Instrument weight: 1.8kg (4lb)
Kit weight: 4kg (8.8lb)
Plot 50mm (1.96”)
Working range: 0.3 to 4 MPa (50 to 580 psi)
Scale resolution Analogue: 0.05 MPa (5 psi) Digital:0.01 MPa (1 psi)
Instrument length: 290mm (11.5")
Activator height: (including bezel) 85mm (3.4")
Instrument weight: 2.0kg (4.4lb)
Kit weight: 5.2kg (11.5lb)
Power supply
2 x LR6 (AA) alkaline dry batteries (digital model only) Battery life: 2000 hours
Packing list 20mm Kit
Elcometer 506 Adhesion Tester with 20 mm studs (x 10), standard 20 mm stud flange, stud detacher with handle, Araldite standard two-component epoxy adhesive (2 x 15 ml tubes), abrasive pad, carrying case, 2 x AA LR6 batteries (digital version only), test certificate and instructions.
Packing list 50mm Kit
Elcometer 506 Adhesion Tester with 50 mm studs (x 6), standard 50 mm stud collar, 50 mm stud detacher shaft, 50 mm stud detacher, Araldite standard two-component epoxy adhesive (2 x 15 ml tubes), abrasive pad, carrying case, 2 x AA LR6 batteries (digital version only), test certificate and instructions.
Standards
ASTM D4541, ASTM D7234, AS/NZS 1580.408.5, BS 1881-207,DIN 1048-2, EN 12636, EN 13144, EN 1542,EN 24624,ISO 16276-1, ISO 4624,
JIS K 5600-5-7, NF T30-606,NF T30-062
