Elcometer 510 Automatic Traction Gauge
The Elcometer 510 Automatic Tensile Adhesion Gauge accurately measures the cohesive strength between the coating and the substrate.
- Automatic hydraulic pump ensures smooth, continuous load application for consistent, repeatable results.
- Fully adjustable tensile range of 0.1-1.4 MPa/s (15-203psi) to meet national and international standards.
- Choice of 10, 14.2, 20 and 50mm stud diameters
- User-definable limits with unique pressure hold/release function
- User-definable measurement range with accuracy of ± 1% of full scale:
- Plot 10mm: 100 MPa / 14400psi
- 14.2mm block: 50 MPa / 7200psi
- Plot 20mm: 25 MPa / 3600psi
- Plot 50mm: 4MPa / 580psi
- Robust, dust and water resistant IP64 design
- Choice of units: Mpa, psi, Nmm² and N
- Full range of standard and 'thin substrate' actuator skirts (compatible with Elcometer 506) for testing coatings applied to thick, thin, flat or convex substrates
- Store up to 60,000 records with individual tensile graphs for up to 2,500 alpha numeric batches, including attribute failure mode information.
- USB and Bluetooth® data output - Compatible with ElcoMaster® App for iPhone, iPod, iPad and Android mobiles.
Avantages
- Powerful
- Effective
- Resistant
- Weight
Vidéo
Spécifications
Pressure accuracy
±1% of full scale
Tensile curve accuracy
±(2.5% + 0.3 seconds)
Pressure resolution
0,01MPa (1psi)
Resolution of the traction curve
0,01MPa/s (1psi/s)
Plots
Plot d'un diamètre 10mm (0,39”)
Plage de travail : 8 - 100MPa (1 200 - 14 400psi)
Plage de la courbe de traction: 0,4 - 5,6MPa/s (58 - 812psi/s)
Hauteur activateur: 85mm (3,4”)
Poids instrument: 2,9kg (6,4lb)
Plot diameter 14.2mm (0.56")
Working range: 2 - 25MPa (300 - 3600psi)
Tensile curve range: 0.1 - 1.4MPa/s (15 - 203psi/s)
Activator height: 85mm (3.4")
Instrument weight: 2.9kg (6.4lb)
Kit weight: 6.1kg (13.5lb)
Plot diameter 20mm (0.76")
Working range: 2 - 25MPa (300 - 3600psi)
Tensile curve range: 0.1 - 1.4MPa/s (15 - 203psi/s)
Activator height: 85mm (3.4")
Instrument weight: 2.9kg (6.4lb)
Kit weight: 6.1kg (13.5lb)
Plot diameter 50mm (1.96")
Working range: 0.3 - 4MPa (50 - 580psi)
Tensile curve range: 0.02 - 0.22MPa/s (2 - 32psi/s)
Activator height: 110mm (4.3")
Instrument weight: 3.1kg (8.3lb)
Kit weight: 7.3kg (16.1lb)
Power supply
8 x AA batteries (16 rechargeable batteries supplied with charger) or mains power (T model only)
Battery life
~ 200 pulls per charge up to 25MPa (3600psi) at 1MPa/s (150psi/s), recharge time <5 hours
Packing list Kit 20mm
Elcometer 510 Adhesion Tester with 20mm studs (x10), standard flange for 20mm studs, handle for 20mm stud remover, remover for 20mm studs, Araldite standard two-component epoxy (2 x 15ml tubes), abrasive pad, shoulder strap, carrying case, 16 x AA batteries and charger (UK, EU, USA, AUS), mains plug (UK, EU, USA, AUS) (Model T), ElcoMaster® CD and USB cable, calibration certificate and instruction manual.
Packing list Kit 50mm
Elcometer 510 Adhesion Tester with 50mm studs (x6), standard flange for 50mm studs, handle for 50mm stud remover, remover for 50mm studs, Araldite standard two-component epoxy (2 x 15ml tubes), abrasive pad, shoulder strap, carrying case, 16 x AA batteries and charger (UK, EU, USA, AUS), mains plug (UK, EU, USA, AUS) (Model T), ElcoMaster® CD and USB cable, calibration certificate and instruction manual.
